5HT 10-R

Type 5HT / 5HTP Time-lag Fuse Series (High -Breaking Capacity) 5HT/5HTP Series, 5x20mm Ceramic Tube Time-Lag Fuse RoHS 2 Compliant Description 5x20mm Time-Lag surge withstand, high breaking capacity, ceramic body cartridge fuse designed, approved and complied with IEC 60127-2,standard sheet 5. Features - High breaking capacity (250V ac @1500A) - Meet IEC standard 60127-2, sheet 5 - Wide operating temperature range - Bulk and Tape & Reel packing available - RoHS 2 compliant - Halogen Free - Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Ceramic Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : “bel”, ”T”, ”Current Rating”, “H”,”250V”, ”Appropriate Safety Logos”, ”  ”（ RoHS 2 compliant） Marking On Label : "bel", "5HT”or”5HTP", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Electrical Characteristics (IEC-127-2 STANDARD SHEET 5) Safety Agency Approvals Rated Current 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MIN MAX Safety Agency Safety Agency Certificate Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 1410140 1A-6.3A/250V AC@1500A 40000505 1A-10A/250V AC@1500A 100mA to 3.15A 1 30 1 80 95 5 10 100 4A to above 1 30 1 80 150 5 20 100 hr. min. sec sec ms sec ms ms E20624 In clause 9.2, the test voltage for 5HTP ratings from 1A to 6.3A is 63VDC. LR39772 250mA-6.3A/600V AC@150A 250mA-10A/250V AC@1,500A 250mA-10A 250mA-10A/250V AC@1,500A /250V AC JET1037-31003-1008 JET1037-31003-1009 1A-5A/250V AC@1500A 2002010207021531 250mA-6.3A/250V AC@1,500A CQC18012185697 8A-10A/250V AC@1,500A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 5HT / 5HTP 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B. (260+/-5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Typical Cold Volt-drop Resistance @100%In (ohms) (Volt) max. Voltage and Interrupting Ratings Maximum Melting I²T Melting I²T Power